undefined
EUTM file information

018775781

Procudi

October 13, 2022

Trademark Summary

The trademark application procudi was filed by Procudi GmbH, a corporation established under the laws of the Federal Republic of Germany (the "Applicant"). The application was published for oppositions on November 29, 2022, and it was registered by office on March 8, 2023 without any oppositions.

The application was filed in German (English was selected as the second language).

Goods And Services

  • The mark was filed in class 4 with following description of goods:
    1. Lubricants and industrial greases, waxes and fluids
    2. Isolating oils
    3. Solid lubricants for industrial purposes
    4. Greases for technical purposes
    5. Lubricating graphite
    6. Preservatives for metals [grease]
    7. Motor vehicle lubricants
    8. Industrial oil
    9. Lubricants for agricultural implements
    10. Lubricating oils containing additives which protect metal against wear by friction
    11. Non-chemical additives for coolants
    12. Lubricating oils for cooling metal during cutting.
  • The mark was filed in class 6 with following description of goods:
    1. Molds of metal
    2. Metal hardware
    3. Pipes, tubes and hoses, and fittings therefor, including valves, of metal
    4. Nuts, bolts and fasteners, of metal
    5. Unprocessed and semi-processed materials of metal, not specified for use
    6. Welding and soldering materials
    7. Extruded aluminium sections
    8. Metallic mountings
    9. Metal springs
    10. Flanges of metal [collars]
    11. Semi-finished articles of aluminium or its alloys
    12. Semi-finished articles of copper or its alloys
    13. Semi-finished articles of nickel or its alloys
    14. Semi-finished articles of lead or its alloys
    15. Semi-finished articles of tin or its alloys
    16. Rings of metal
    17. Grease nipples
    18. Brazing alloys
    19. Welding wire
    20. Welding rods
    21. Soft solder
    22. Foundry moulds of metal
    23. Shaped metal sections
    24. Profiled metal sections [semi-finished]
    25. Aluminium and its alloys
    26. Wrought common metals
    27. Laminated metals
    28. Metal sheet, strip and coil
    29. Lead and its alloys
    30. Bronze
    31. Chromium
    32. Chromium alloys
    33. Stainless steel
    34. Iron
    35. Iron carbon alloys
    36. Iron castings [semi-finished]
    37. Galvanized iron
    38. Metal forgings
    39. Cast iron, unwrought or semi-wrought
    40. Hollow steel bars
    41. Ceramic reinforced aluminium
    42. Steel alloys
    43. Non-ferrous metals and their alloys
    44. Alloys of common metal
    45. Casting alloys
    46. Brass
    47. Metals in powder form for 3D printers
    48. Alloys of metal
    49. Metal powders used in manufacturing
    50. Metal slugs
    51. Extrusions of metal
    52. Molybdenum
    53. Nickel
    54. Armour-plating of metal
    55. Alloy forgings (rough or semi-finished -) [metal]
    56. Sintered hard metals
    57. Titanium and its alloys
    58. Tungsten
    59. Tungsten powder
    60. Zinc and its alloys
    61. Semi-finished goods, namely, Metal foundry products
    62. Semi-finished goods, namely, Aluminum castings
    63. Semi-finished goods, namely, Water-tight rings of metal.
  • The mark was filed in class 7 with following description of goods:
    1. Mechanical seals [machine parts]
    2. Joints [parts of engines]
    3. Sealing joints [parts of machines]
    4. Joints for pipes (metal -) [parts of machines]
    5. Coating machines
    6. Electrostatic coating machines
    7. Cutting, drilling, abrading, sharpening and surface treatment machines and apparatus
    8. Welding and soldering machines and devices
    9. Machine parts, For use with the following goods: Construction machines, Agricultural, gardening and forestry machines and apparatus
    10. Mechanical equipment and parts of machines relating thereto, for use in the following fields: Farming, Earthworks, Construction works, Oil and gas extraction, mining extraction
    11. Metal sealing rings (as machine parts)
    12. Machine parts, namely Face seals
    13. Machine parts, namely, Mechanical seals
    14. Seals of metal or ceramic materials for oil [parts of machines]
    15. Dynamic seals [parts of machines]
    16. Machine parts, namely, Static seals.
  • The mark was filed in class 17 with following description of goods:
    1. Waterproofing and moisture proofing articles and materials
    2. Seals, sealants and fillers
    3. Membranes and semi-processed synthetic filtering materials
    4. Elastomers
    5. Flexible pipes, tubes, hoses and fittings therefor (including valves), and fittings for rigid pipes, all non-metallic
    6. Resins in extruded form
    7. Insulation and barrier articles and materials
    8. Adhesive tapes, strips, bands and films
    9. Semi-worked plastic substances
    10. Clutch and brake linings
    11. Clutch linings
    12. Caulking compounds
    13. Chemical compositions for sealing leaks
    14. Seals (Non-metallic -) for oil
    15. Gaskets for industrial use
    16. Gaskets for automotive use
    17. Gaskets for commercial vehicles
    18. Gaskets in the form of rings
    19. Gaskets in the form of sheets
    20. Weatherstripping sealants in the nature of caulk
    21. Sealing profiles (Non-metallic -)
    22. Hydraulic packing
    23. Combination seals
    24. Plastic seals
    25. O-rings
    26. Oil seals for vehicles
    27. Oil seals [packings]
    28. Mechanical face seals for vehicles and machines
    29. Sliding ring seals, for use in relation to the following goods: Vehicles and machinery.
  • The mark was filed in class 40 with following description of goods:
    1. Metal treating
    2. Custom manufacture and assembly services, in relation to the following goods: Parts for machines and Machine seals
    3. Treatment of materials and conversion of materials for the production of coatings and rolling surfaces on parts of machines
    4. Treatment of materials and conversion for manufacturing seals
    5. Die casting
    6. Custom 3D printing for others
    7. Shaping of metal components
    8. Contract moulding services
    9. Galvanising of metal
    10. Material treatment information
    11. Processing of metal surfaces using precision grinding techniques
    12. Treatment and coating of metal surfaces
    13. Heat treatment and coating of steel
    14. Treatment of materials by laser beam
    15. Annealing of surfaces of machine parts (Services for the -)
    16. Metal tempering
    17. Hard chromium plating and hard nickel plating of metal surfaces
    18. Cold forming of metal
    19. Metal brazing
    20. Treating [embossing] of metal
    21. Metal coating [not painting]
    22. Metallurgical processing
    23. Powder coating
    24. Grinding
    25. Metal plating and laminating
    26. Soldering
    27. Application of wear-resistant coatings on metals and plastics
    28. Application of wear resistant coatings to engineering components
    29. Application of coatings using thermal plasma spraying techniques
    30. Application of coatings using chemical vapor deposition techniques
    31. Application of wear resistant coatings by autocatalytic processes
    32. Application of coatings using vacuum deposition techniques
    33. Application of coatings using physical vapor deposition techniques
    34. Titanium nitride coating
    35. Application of coatings through build-up welding
    36. Finishing processing
    37. Metal fabrication and finishing services
    38. Metal finishing
    39. Surface finishing of metal articles.
  • The mark was filed in class 42 with following description of goods:
    1. Engineering services
    2. Natural science services
    3. Testing, authentication and quality control
    4. Science and technology services
    5. Design of vehicles and vehicle parts and components
    6. Product development for vehicle construction and for vehicle body construction
    7. Development of coatings for non-metals
    8. Development of coatings for metals
    9. Advisory services relating to design engineering
    10. Engineering feasibility studies
    11. Research relating to mechanical engineering
    12. Engineering services relating to metal forming systems
    13. Engineering project management services
    14. Development of seals and sealing concepts for machine and vehicle construction
    15. Technical consultancy relating to seals and sealing concepts in the field of machine and vehicle construction
    16. Functional and material and damage testing of seals (quality control)
    17. Conception, planning and design of seals and sealing concepts in the field of machine and vehicle construction.