EUTM file information

000592931

IEM


July 23, 1997

Trademark Summary

The trademark application IEM was filed by Anchor Lamina America, Inc., a U.S. corporation (the "Applicant"). The application was published for oppositions on April 11, 1999, and it was registered by office on November 18, 1999 without any oppositions.

The application was filed in English (Italian was selected as the second language).

Two renewals of the trademark were recorded, one on August 5, 2007, and the other one on July 24, 2017.

Appointment and Replacement of representative of the trademark registration was recorded on June 21, 2004. Appointment and Replacement of representative of the trademark registration was recorded on April 29, 2007. A transfer of the trademark registration was recorded on July 1, 2007. Change of name and address of the trademark registration was recorded on August 5, 2007. Change of name and address of the trademark registration was recorded on August 19, 2007. Appointment and Replacement of representative of the trademark registration was recorded on September 23, 2007. Change of name and professional address of the trademark registration was recorded on April 13, 2009. Relative errors of the trademark registration was recorded on July 8, 2012. A transfer of the trademark registration was recorded on November 12, 2012. Appointment and Replacement of representative of the trademark registration was recorded on July 26, 2017. Change of name and professional address of the trademark registration was recorded on September 27, 2018. Appointment and Replacement of representative of the trademark registration was recorded on June 17, 2019.

The application claimed as seniority of the Republic of Austria trademark null registered on July 4, 1991 and filed on January 20, 1991 which was accepted by the office.


Goods And Services

  • The mark was filed in class 6 with following description of goods:
    1. Screws
    2. Screw keys
    3. Bolts
    4. Nuts
    5. Washers
    6. Dowel pins.
  • The mark was filed in class 7 with following description of goods:
    1. Tooling components for sheet metal dies and plastic moulds
    2. Diemakers' supplies
    3. Hoist rings
    4. Punch shanks
    5. Roller stock guides
    6. Guide rails
    7. Air presses
    8. Ball bearing cases, guide posts and bushings
    9. Die sets
    10. Die springs
    11. Keeper blocks
    12. Cam slide gibs
    13. Cam gibs
    14. Guide blocks
    15. Corner guide blocks
    16. Wear plates
    17. Draw die levelling plates
    18. Gib blocks
    19. Gibs
    20. V-blocks
    21. U-blocks
    22. Centre keys
    23. Centre key guides
    24. Split V-drivers
    25. Gib assemblies
    26. Base plates for gib assemblies
    27. Wear strips
    28. Spring cages
    29. Spring guards
    30. Spring retainers
    31. Cam slide units
    32. Punch retainers
    33. Pad retainers
    34. Spools
    35. Stoop blocks
    36. Kiss blocks
    37. Set screws
    38. Lifter pins
    39. Lifter lugs
    40. Casting liners
    41. Bushings, guide pins
    42. Guide posts
    43. Mould pins
    44. Urethane pads with metal backing plate
    45. Ramp gages
    46. Lubricating pumps
    47. Pry bars
    48. Stock pushers
    49. Keeper plates
    50. Gib plates
    51. Gib lids
    52. Heel plates
    53. T-gibs
    54. L-gibs
    55. Wearstrip ways
    56. Box cam units
    57. Aerial cam units
    58. Die mount cam units.
  • The mark was filed in class 8 with Clamps for bushings and hand held lubricating guns..